Active Drain System | Exclusively designed for ROLAND 700. The system improves the draining of the washing and ink mixture in the waste lines. By avoiding blockages in the drain region cleaning and maintenance are reduced and production safety is increased. |
---|
Alternating Washing | Exclusively designed for ROLAND 700.Alternating Washing upgrads your printing machine with separate pipes for detergent.You can alternately work with UV and conventional inks without loss of time by the conversion.In addition, an improved cleaning effect is achieved by the separation of the detergent.At the same time the ease of use is extremely high. |
---|
ColorPilot | Color Pilot is a color measuring and control system, which can be mounted on the ROLAND 300 and up.The system measures a speed of 25 cm / sec the print control tape and does at the same time a densitometric and colorimetric measurement.The setup times are reduced enormously. Waste of paper is reduced. |
---|
ColorPilot plus | Color Pilot plus is required for perfecting and verso printing for the ROLAND 500 and up.The measuring arm can be positioned flexibly in the y-direction of the sheet.To print control strip can be positioned across to the printing direction in any position on the sheet. |
---|
ColorPilot smart | The ColorPilot smart system is designed for small-format printing machines of the series ROLAND 50 and ROLAND 200.It allows spot measurement to calculate the color density and colorimetric values. |
---|
E-Line Chambered Doctor Blade | Exclusively designed for ROLAND 700.Retrofitting the blade system in the doctor blade chamber allows a quick change of cutter.The screws that hold the knife normally is replaced by a clamping rod.This minimizes the danger of causing damage to the machine and makes cleaning faster and more effectively. |
---|
Inking Roller Blowing Device | The Inking Roller Blowing device sucks air from the print shop and blows it onto the ink rollers, thereby the surface water evaporates.The result is a stable printing operation.
At high speed, the system sucks the overspray from the machine and filters the air in order to minimize ink splitting and health risks. |
---|
InlineColor Pilot | The InlineColorPilot has been developed for the ROLAND 700 and ROLAND 900/900 XXL.It enables non-stop control and uses a high resolution CCD sensor. |
---|
IntegrationPilot | The integrationPilot software package from manroland contains interfaces for transferring order data from the MIS and from CIP 3 files.This allows order management, optimize planning and management in a clear and simple way.Print jobs can be directly generated in the print shop and individual parameters can be changed. *The IntegrationPilot requires the PressManager. |
---|
IntegrationPilot plus | The integrationPilot plus enlarges the normal integrationPilot by a comprehensive production data collection system. It allows automatic and detailed data collection, which can be used for analysis. Downtimes, production times and costings become easy and transparent. |
---|
Intercommunication System | The Intercommunication System guarantees the communication in the printshop at long machines.The system filters the ambient noise of the machine, is flexible and can be installed at any position in the print shop. |
---|
okBalance | The okBalance system is an add-on for the ColorPilot system and guarantees a constant level of grey just at the push of a button.This is achieved by an automated colour control, which considers not only full colours but other parameters. |
---|
PermanentDelta | PermanentDelta works permanently at a different speed between the plate cylinder and the dampening roller.This system minimizes the formation of bunches on the printing plate and removesthem if necessary. |
---|
Plate De-Inking | To minimize the setup times for short runs, manroland offers the Plate De-Inking system.After printing more sheets are used to remove residual color. Washing time and amount of detergent are reduced. |
---|
PressManager perfect 2.0 | The PressManager perfect 2.0 consists of a central database for order preparation, planning and management.The setup times are extremely reduced, because colour can be pre-adjusted. |
---|
PressManager smart Online | smart Online minimizes the setup time by up to 25 %. The area coverage for each colour is calculated from the PPF data and is accessible online. |
---|
PressManager smart JobCard | smart JobCard works the same way like smartOnline. Here, the jobcard is the data medium for the colour matching. |
---|
ROLAND InlineCoater smart | Roland InlinceCoater smart is a pivotal coating module, which is installed preferably at the last printing unit.The system achieves up to 70 brigthness points and thus is for many users is more than sufficient. |
---|
ROLAND InlineFoiler | The manroland InlineFoiler enables the printer to stamp cold foils and print on these stamped foils in one printing act.The module is compatible with all printing machines of Roland series 700 B1 & B2 and 500. It can be used with conventional or UV ink. |
---|
ROLAND InlineObserver | The InlineObserver consists of cameras which control the sheet guiding within the machine. The number of cameras is depending on the impression counter. |
---|
ROLAND InlineSheeter | The Inlinesheeter is also called roll-to-sheet converter and allows the efficient use of paper rolls. It consists of a stageless cut-off length, so that the costs for print substrate can be reduced. |
---|